Engineering business-RUIBANG Chemical industry technique

聚酯裝置廢氣、廢水成套處理裝置

聚酯裝置廢氣、廢水成套處理裝置

1）聚酯生産裝置廢氣主要來源：液環真空泵的放空尾氣、酯化和縮聚過料過程中的氮氣尾氣、漿料配制釜放空、EG 儲罐的放空，廢氣中含有少量乙二醇、乙醛、甲醛和醚類；2）廢水的主要來源是：酯化副産物酯化水、水蒸汽噴射泵的凝水（EG 噴射泵沒有）、沖洗地面的廢水等，COD 含量達到 3-4 萬；一、洗滌工序噴淋洗滌塔是應用于各種尾氣淨化場合的理想處理設備，尤其尾氣流含臭氣濃度高的環境中。設備尺寸
水溶性聚酯漿料

水溶性聚酯漿料

目前新型高速織機替換了(le)原有的低速梭織機，紡織品種也正向細支高密方向發展。先進的紡織設備，高檔産品的生産都需要相應的新型材料和新技術的支持，而紡織漿料性能的好壞嚴重影響着紡織品的生産效率和産品質量，另一方面，随着紡織用纖維比例結構的變化----合成纖維比重增大，對合成漿料的總需求量也不斷增加。傳統的合成漿料如聚乙烯醇（PVA)對環境污染嚴重，西歐國家客商要求我國出口的紡織品上漿不得使用PVA,以适應
continuous polymerization device

continuous polymerization device

You can freely choose the reactors according to your own reqirement: such as three reactors, four reactors and five reactors.Low temperature, low mol-ratio, tender reaction,low DEGEG will be recycled
Intermittent/semi-continuous polymerization device

Intermittent/semi-continuous polymerization device

Single production line 3-60 tons output per day, intermittent/semi-continuous differentiation polyester deviceCharacteristics:With the compact device, short technical process, easily operation charact
Solid State Polymerization (SSP) device

Solid State Polymerization (SSP) device

Solid State Polymerization (SSP) deviceFour Areas, six systemsChip pretreatment area- crystallizing and dryingPre-crystallization systemCrystallization systemReaction AreaPre-heating system ——increase
Enameled Wire Lacquer decice

Enameled Wire Lacquer decice

PE(130，155 grade),with the distinct advantages: big output.but with it’s low heat-resistance and thermal-shock resistance, it can be used in the winding of ordinary motors.PEI(180 grade), with the THE
Multi-functional polymeriation and polycondensation device

Multi-functional polymeriation and polycondensation device

Intermittent/continuous technology can be used in experimental ploymeriation(small batches and value-added).The equipment is designed to industrial Engineering,it can simulate the industrial productio
Direct Spinning Dacron by Polyester Wastes

Direct Spinning Dacron by Polyester Wastes

The Resources of Raw MaterialsPolyester wastes include: Waste polyester bottles Waste polyester pieces Waste polyester films Waste PETs Inviscid polyester Discharged raw materials Technical Roa
Automatic Control System(DCS PLC)

Automatic Control System(DCS PLC)

Application Area:Petrochemical IndustryMetallurgy Industrywater treatment industryElectric Power industryMechanical and Electronics IndustryMajor Functions:Major Loop AdjustmentLogical ControlSequenti
Intermittent State Polymerization device

Intermittent State Polymerization device

With special rotary drum designed inside, to ensure the material can be mixed fully, the dust remover system can protect the vaccum pump.With PLC/DCS control system, the finished products' quality
differentiation polyester device

differentiation polyester device
SIPM

SIPM
Used

Used